CCNA - Cisco Certified Network Associate

 Home / IT Training / Hardware Training / CCNA - Cisco Certified Network Associate Training

CCNA - Cisco Certified Network Associate (200-125)-V3

This course prepares students for opportunities in the real world by providing skills that range from basic networking abilities to VLAN troubleshooting. CCNA course support successful careers in network design administration and technical support.


Prerequisites: For students who have completed the A+, this section will be for the revision of the key concepts required to begin N+.

Content
Network Fundamentals
  • Compare and contrast OSI and TCP/IP models
  • Compare and contrast TCP and UDP protocols
  • Firewalls, Access points, Wireless controllers
  • Compare and contrast collapsed core and three-tier architectures
  • Compare and contrast network topologies (Star, Mesh, Hybrid)
  • Select the appropriate cabling type based on implementation
  • Configure, verify, and troubleshoot IPv4 addressing and subnetting Unicast, Broadcast, Multicast
  • Describe the need for private IPv4 addressing
  • Identify the appropriate IPv6 addressing scheme
  • Compare and contrast IPv6 address types (Global unicast,Unique local Link local, Multicast, Modified EUI 64, Autoconfiguration,Anycast)
LAN Switching Technologies
  • Describe and verify switching concepts,MAC learning and aging,Frame switching, Frame flooding,MAC address table,
  • Configure, verify, and troubleshoot VLANs (normal/extended range)
  • Access ports (data and voice),Default VLAN,Trunk ports,Add and remove VLANs on a trunk,DTP, VTP (v1&v2), and 802.1Q,Native VLAN
  • Configure, verify, and troubleshoot STP protocols
  • STP mode (PVST+ and RPVST+),STP root bridge selection
  • Cisco Discovery Protocol
  • Configure, verify, and troubleshoot (Layer 2/Layer 3) EtherChannel
  • Static, PAGP, LACP
Routing Technologies
  • Describe the routing concepts
  • Interpret the components of a routing table
  • Describe how a routing table is populated by different routing information sources
  • Admin distance
  • Configure, verify, and troubleshoot inter-VLAN routing
  • Compare and contrast static routing and dynamic routing
  • Compare and contrast distance vector and link state routing protocols
  • Compare and contrast interior and exterior routing protocols
  • Configure, verify, and troubleshoot IPv4 and IPv6 static routing
  • Configure, verify, and troubleshoot Default route
  • Configure, verify, and troubleshoot single area and multi-area OSPFv2
  • Authentication, Redistribution, Router summarization
  • Configure, verify, and troubleshoot EIGRP
  • Configure, verify, and troubleshoot RIPv1
  • Configure, verify, and troubleshoot RIPv2
  • Configure, verify, and troubleshoot Telnet, SSH
WAN Technologies
  • Configure and verify PPP and MLPPP on WAN interfaces using local authentication
  • Configure, verify, and troubleshoot PPPoE client-side interfaces using local authentication
  • Configure, verify, and troubleshoot GRE tunnel connectivity
  • Describe WAN access connectivity options (MPLS, Metro Ethernet)
  • Internet VPN (DMVPN, site-to-site VPN, client VPN)
  • Configure and verify Frame-Relay
Describe DNS lookup operation
  • Troubleshoot client connectivity issues involving DNS
  • Configure and verify DHCP on a router (excluding static reservations)
  • Troubleshoot client- and router-based DHCP connectivity issues
  • Configure, verify, and troubleshoot basic HSRP
  • Configure, verify, and troubleshoot inside source NAT (Static, Pool PAT)
  • Configure and verify NTP operating in a client/server mode
Infrastructure Security
  • Configure, verify, and troubleshoot port security (Static, Dynamic Sticky, Max MAC addresses, Violation actions, Err-disable recovery)
  • Configure, verify, and troubleshoot IPv4 access list for traffic filtering (Standard,Extended, Named)
  • Verify ACLs using the APIC-EM Path Trace ACL Analysis tool
  • Configure, verify, and troubleshoot basic device hardening
  • Describe device security using AAA with TACACS+ and RADIUS
Infrastructure Management
  • Configure and verify device-monitoring protocols (SNMPv2,SNMPv3,Syslog)
  • Troubleshoot network connectivity issues using ICMP echo-based IP SLA
  • Configure and verify device management
  • Configure and verify initial device configuration
  • Perform device maintenance
  • Cisco IOS upgrades and recovery (SCP, FTP, TFTP, and MD5 verify)
  • Password recovery and configuration register
  • Use Cisco IOS tools to troubleshoot and resolve problems
  • Ping and traceroute with extended option, Terminal monitor,Log events
  • Describe network programmability in enterprise network architecture
Know More about Course Duration, Sessions and latest offers
  • Cyber Metric Services
  •   8/1, 5th Main Rd, Ganganagar,
         R.T.Nagar, Bangalore-560032
         Karnataka, India
  •   +91 -80 -2343 5598
  •    +91 -94 -818 07258
  •  info@cmscomputer.in

Current Happenings